With Industry Standards 17x40x12 Bearing | ||||||||
|---|---|---|---|---|---|---|---|---|
| d | D | a | B | C | C0 | Size | Peso | |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 10,9 kN | 5,9 kN | 17x40x12 | - |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 12 mm | - | - | 0,069 Kg |
| 7203 C | 17 mm | 40 mm | 9,8 mm | 12 mm | 12 mm | - | - | 0,075 Kg |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 12 mm | - | - | - |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 12 mm | - | - | 0,069 Kg |
| 7203 C | 17 mm | 40 mm | 9,8 mm | 12 mm | 12 mm | - | - | 0,075 Kg |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 12 mm | - | - | - |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 12 mm | - | - | - |
| 7203 C | 17 mm | 40 mm | 9,8 mm | 12 mm | 12 mm | - | - | - |
| 7203 C | 17 mm | 40 mm | 9,9 mm | 12 mm | 12 mm | - | - | - |
| Limiting Speed Rating (r/min): | 5300 |
| Fatigue Load Rating (kN): | 2.75 |
| D | 180mm |
| d | 85mm |
| Reference Speed Rating (r/min): | 6100 |
| Seals or Shields: | Open Type |
| Cage Type: | Brass |
| Dynamic Load Rating (kN): | 143 |
| Weight: | 7.35 KGS |
| B | 60mm |
| 17,000 mm x 40,000 mm x 12,000 mm SNR 6203LTZZ deep groove ball bearings | P180°:222 kN; R1:122.237 mm; P150°:185 kN; Taconite seal:TER 550; R2:42.862 mm; Da:359.999 mm; N1:34.925 mm; Cap bolt recommended tightening torque:2467.6 N·m; Mass pillow block:245 kg; Initial grease fill:2154.6 g; |
| 17 mm x 40 mm x 12 mm Timken 203PPG deep groove ball bearings | a:3 mm; Permissible sliding velocity v min.:0 m/s; Specific static load factor K0:45 N/mm²; Mass bushing:0.025 kg; α:105 °; Tolerance housing:H7; Coefficient of friction µ max.:0.15; Tolerance shaft:e7; B:16 mm; d:15 mm; |
| 17 mm x 40 mm x 12 mm NSK 6203L11-H-20ZZ deep groove ball bearings | Weight:0.01 KGS; Cage Type:Steel; d:10mm; SKU:61800-2rsr-fag; Fatigue Load Rating (kN):0.0295; Seals or Shields:Two Rubber Seals; Clearance:Standard; Dynamic Load Rating (kN):1.45; D:19mm; Limiting Speed Rating (r/min):18000; |
| 17 mm x 40 mm x 12 mm KOYO 3NC6203HT4 GF deep groove ball bearings | Grease Limiting Speed (r/min):6700; SKU:30305-ntn; Static Load Rating (kN):47.5; Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; d:25mm; Dynamic Load Rating (kN):48.5; D:62mm; B:18.25mm; |
| 17 mm x 40 mm x 12 mm KOYO M6203 deep groove ball bearings | Seals or Shields:Open Type; D:270mm; Static Load Rating (kN):1460; Availability:In Stock; B:96mm; Dynamic Load Rating (kN):1080; d:150mm; Limiting Speed Rating (r/min):2200; Clearance:C2; Reference Speed Rating (r/min):1600; |
| 17 mm x 40 mm x 12 mm CYSD 7203BDB angular contact ball bearings | Seals or Shields:Open Type; D:270mm; Static Load Rating (kN):1460; Availability:In Stock; B:96mm; Dynamic Load Rating (kN):1080; d:150mm; Limiting Speed Rating (r/min):2200; Clearance:C2; Reference Speed Rating (r/min):1600; |
| 17 mm x 40 mm x 12 mm NTN AC-6203ZZ deep groove ball bearings | Limiting Speed Rating (r/min):5300; Fatigue Load Rating (kN):2.75; D:180mm; d:85mm; Reference Speed Rating (r/min):6100; Seals or Shields:Open Type; Cage Type:Brass; Dynamic Load Rating (kN):143; Weight:7.35 KGS; B:60mm; |
| 17,000 mm x 40,000 mm x 12,000 mm NTN-SNR 6203NR deep groove ball bearings | Limiting speed for lubrication with:0 min-1; Static (Cor):68 mm; D1:mm; B2 B Dynamic (Cr):mm; Grease:8000 kN; B1:mm; D:920 mm; d:750 mm; Oil:516.140 kN; Pu:3100 kN; |
| 17 mm x 40 mm x 12 mm SNFA E 217 /S/NS 7CE3 angular contact ball bearings | P180°:222 kN; R1:122.237 mm; P150°:185 kN; Taconite seal:TER 550; R2:42.862 mm; Da:359.999 mm; N1:34.925 mm; Cap bolt recommended tightening torque:2467.6 N·m; Mass pillow block:245 kg; Initial grease fill:2154.6 g; |
| 17 mm x 40 mm x 12 mm CYSD 6203-RS deep groove ball bearings | Seals or Shields:Open Type; D:270mm; Static Load Rating (kN):1460; Availability:In Stock; B:96mm; Dynamic Load Rating (kN):1080; d:150mm; Limiting Speed Rating (r/min):2200; Clearance:C2; Reference Speed Rating (r/min):1600; |
17 mm x 40 mm x 12 mm ISO 7203 C angular contact ball bearings Video
ISO 7203-1:2011(en), Fire extinguishing media — Foam
Annex C Determination of volume percentage of sediment ... ISO 7203-1 was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and ... ISO 7203 consists of the following parts, under the general title Fire extinguishing
ISO 7203-1
Jun 1, 2011 - Annex C (normative) Determination of volume percentage of sediment. ... ISO 7203-2, Fire extinguishing media — Foam concentrates — Part 2:
ISO 7203-1 - SiS
ISO. 7203-1. Second edition. 2011-06-01. Fire extinguishing media — Foam ... Annex C (normative) Determination of volume percentage of sediment
ISO 7203-3 - SiS
Mar 1, 1999 - ISO 7203-3:1999(E). INTERNATIONAL. STANDARD. ISO. 7203-3 ... Annex C (informative) Small-scale fire test for quality control purposes
ISO 7203-1:2019(en), Fire extinguishing media — Foam
Annex C Determination of volume percentage of sediment ... This third edition cancels and replaces the second edition (ISO 7203-1:2011), which has ... expansion foam concentrates for top application to water-immiscible liquids; ISO 7203-3,
ISO 7203-3 - EVS
7203-3. Third edition. 2019-07. Reference number. ISO 7203-3:2019(E). This document is a ... Annex C (normative) Determination of percentage of sediment
Personnel Protection and Safety Equipment for the Oil and
... as given in Table 10.5 and should be tested in accordance with ISO 7203-1. ... (±2)°C. If there is a difference of more than 0.5 PH between the two values the
Fire extinguishing media -- Foam ... - Standards New Zealand
Jul 1, 2019 - ISO 7203-2:2019. Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium- and high-expansion foam concentrates for
ISO 7203-1:2019 - Fire extinguishing media — Foam ... - ISO
The foams that conform with ISO 7203-3 are also suitable for top application to fires of water-miscible liquids. The foam concentrates can be suitable for use in non-
ISO - Fomtec
Sep 8, 2011 - Test of foam concentrate according to ISO 7203-2:2011 ... concentrate was conditioned for 7 days at (60+2) °C without prior freezing and