50x90x20 Bearing
Axial loads or thrust loads occur along the horizontal axis or parallel to the rotating shaft or assembly.
Radial loads are applied on a vertical axis along the external surface of the outer ring, which also means that it is perpendicular to the axis of rotation.
Bearings and Loads
When used for lighter loads, ball bearings can easily handle both axial and radial loads. However, the smaller contact points of the spherical balls don’t provide much support against heavier radial loads, which can deform the shape of the different bearing components.
Roller bearings are more suitable for heavy radial loads, but do not spin as freely along its rotating axis – reducing its capacity for axial loads.
Tapered roller bearings are typically used for applications where bearings are subjected to heavy axial and radial loads at the same time.
These share the same basic components as straight roller bearings, but have a conical or tapered shape that allow it to support both heavy radial loads and moderately high RPMs. Due to its design, tapered roller bearings are designed to be very durable and long lasting.
- 50 mm x 90 mm x 20 mm NKE 7210-BE-MP angular contact ball bearings
- 4 Bolt Pillow Block;
- 0 Inch | 0Millimeter
- 50 mm x 90 mm x 22,225 mm Timken 365/362 tapered roller bearings
- Triple Lip Contact
- M06288
- 50 mm x 90 mm x 20 mm CYSD 7210BDT angular contact ball bearings
- 1 Rib Outer Ring
- 15 Degree
- 50 mm x 90 mm x 20 mm FBJ NU210 cylindrical roller bearings
- QM INDUSTRIES
- Mounted Units &
- 50 mm x 90 mm x 20 mm NKE 1210 self aligning ball bearings
- 1 Rib Outer Ring
- 15 Degree
- 50 mm x 90 mm x 20 mm SIGMA NU 210 cylindrical roller bearings
- Triple Lip Contact
- M06288
- 50,000 mm x 90,000 mm x 20,000 mm NTN 6210LUNR deep groove ball bearings
- 4
- 6.4 Inch | 162 Milli
- 50 mm x 90 mm x 20 mm ZEN 6210-2RS deep groove ball bearings
- Triple Lip Contact
- M06288
- 50 mm x 90 mm x 20 mm NTN 7210T2G/GMP4 angular contact ball bearings
- 1 Rib Outer Ring
- 15 Degree
- 50 mm x 90 mm x 20 mm Fersa NJ210FM cylindrical roller bearings
- NTN
- 0692314465905
- 50 mm x 90 mm x 20 mm ISO 7210 A angular contact ball bearings
- QM INDUSTRIES
- Mounted Units &