SKF Wheel Bearings DEVELOP MFG.CORP.

17x40x12 Bearing

Deep Groove ball bearings are the most popular of all the ball bearing types because they are available in a wide variety of seal, shield and snap-ring arrangements.

The bearing ring grooves are circular arcs made slightly larger than the radius of the ball. The balls make point contact with the raceways (elliptical contact when loaded). The inner ring shoulders are of equal height (as the outer ring shoulders).

Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.

17 mm x 40 mm x 12 mm SKF 6203/VA201 deep groove ball bearings: P180° : 222 kN; R1 : 122.237 mm

17 mm x 40 mm x 12 mm NTN 6203 deep groove ball bearings: Limiting speed for lubrication with : 0 min-1; Static (Cor) : 68 mm

17 mm x 40 mm x 12 mm ISO SC203-2RS deep groove ball bearings: P180° : 222 kN; R1 : 122.237 mm

17 mm x 40 mm x 12 mm KOYO 6203N deep groove ball bearings: Weight: : 0.01 KGS; Cage Type: : Steel

17 mm x 40 mm x 12 mm NTN 7203CP5 angular contact ball bearings: Limiting speed for lubrication with : 0 min-1; Static (Cor) : 68 mm

17,000 mm x 40,000 mm x 12,000 mm NTN NU203 cylindrical roller bearings: a : 3 mm; Permissible sliding velocity v min. : 0 m/s

17 mm x 40 mm x 12 mm SNR 7203CG1UJ74 angular contact ball bearings: a : 3 mm; Permissible sliding velocity v min. : 0 m/s

17,000 mm x 40,000 mm x 12,000 mm SNR 6203NZ deep groove ball bearings: Limiting speed for lubrication with : 0 min-1; Static (Cor) : 68 mm

17 mm x 40 mm x 12 mm ISB 6203 NR deep groove ball bearings: Clearance: : Standard; D : 14mm

17 mm x 40 mm x 12 mm NACHI 7203C angular contact ball bearings: Limiting Speed Rating (r/min): : 5300; Fatigue Load Rating (kN): : 2.75

17 mm x 40 mm x 12 mm FAG HCB7203-E-T-P4S angular contact ball bearings: Limiting Speed Rating (r/min): : 5300; Fatigue Load Rating (kN): : 2.75

17 mm x 40 mm x 12 mm ISB N 203 cylindrical roller bearings: Limiting speed for lubrication with : 0 min-1; Static (Cor) : 68 mm